Top

  1. Previous
    Next
    Product 50 of 100
    This product was added to our catalog on Saturday 31 October, 2009.

    NOVAK 6.5 BALLISTIC RACING BRUSHLESS MOTOR
    [3606]

    Price:  $215.00

    Reviews

BRUSHLESS HAS GONE BALLISTIC

The Ballistic 6.5T installed in a Associated® B44 4WD Buggy.

The Ballistic Brushless Motor series – which consists of six different motor turns: 3.5T - 8.5T (#3603 - #3608) – is the result of many years of developing and manufacturing sensored brushless motors, and includes many new features to prove it. This next-generation motor series contains a new, easy-to-adjust timing assembly that alters the RPM range, and includes heavy-duty solder tabs that are strong enough to endure repeated soldering and tough crashes. These sensored motors also sport a newly designed exterior with sleek, black end bells and a reconfigured rear end bell that fits more easily into racing vehicles. And like all Novak racing motors, these brushless motors are blisteringly fast, reaching speeds that will effortlessly satisfy any racer or basher.

BRUSHLESS MOTOR ADVANCEMENTS
But the innovations don't end there. The Ballistic motors' original design defines versatility by featuring interchangeable wound stator construction. By unscrewing the main screws, the motors' solder tab and sensor assemblies can be easily removed to leave only the stator, which can be replaced with additional motor wind options. Moreover, the sensor assembly can be replaced if needed upon crash or unknown damage. The Ballistic motors also boast a removable shielded sensor harness. To account for different size vehicles, Novak's removable sensor harness comes in three different lengths – 9", 6" and 4" – allowing for multiple installation options. The motor is also equipped with a custom-silicone gasket seal to keep dirt and debris from damaging the motor's sensor plug.

Each Ballistic motor is also equipped with a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions, and Thermal Overload technology to ensure the motor is operating at a safe temperature. The motors also feature acompletely rebuildable design, allowing for the ability to upgrade or replace various motor parts.

A shielded sensor harness is included with each Ballistic Motor. For replacements, click here.

SPEED CONTROL COMPATIBILITY
All six Ballistic motors are compatible with Novak's GTB Programmable Racing Brushless/Brush ESC (#1710 / #1711), the SLYDR Brushless ESC (#1712) and other racing brushless sensored speed controls. The Ballistic Brushless Motor 8.5T (#3608) is also compatible with the Havoc 3S Brushless/Brush ESC (#1733). Combined, the Ballistic motors and Novak's programmable speed controls create high-performance machines for world-class racing.

THE NOVAK STANDARD
Like all Novak brushless motors, the Ballistic Brushless Motors are designed, tested and built at the Novak facility in Irvine, Calif. Each motor stator is hand-wound for maximum copper fill, and each motor is individually tested for consistency. The motors are also tuned to the same factory timing, run under a simulated load, and visually inspected, packaged and weighed to ensure the best product is sent to customers.


Exploded view of Ballistic Racing Brushless Motor

BALLISTIC RACING BRUSHLESS MOTOR FEATURES
Sensor-based for excellent torque and low-speed driveability
Oversized front bearing [1/2" x 3/16" (12.7 x 4.8mm)] for increased load handling and bearing life
Rebuildable design with removable shielded sensor harness, sensor assembly, wound stator, sleeve and both end bells
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125" pinion shaft that accepts all existing pinion gears
Adjustable timing to help retain previous user settings
ROAR and IFMAR approved
Meets RoHS compliance and includes 120-Day Warranty
Designed, hand wound and dyno tested by Novak in Irvine, Calif., using globally sourced components
BALLISTIC RACING BRUSHLESS MOTOR SPECS
Ballistic Motors
3.5T
4.5T
5.5T
6.5T
7.5T
8.5T
Part Number
#3603
#3604
#3605
#3606
#3607
#3608
Watts
620
530
420
390
340
280
KV (unloaded)
10,500 RPM/Volt
9,000 RPM/VOLT
7,400RPM/VOLT
6,400RPM/VOLT
5,800RPM/VOLT
5,000RPM/VOLT
Motor Size
2.07" x 1.41" (52.6 x 35.8mm)
2.07" x 1.41" (52.6 x 35.8mm)
2.07" x 1.41" (52.6 x 35.8mm)
2.07" x 1.41" (52.6 x 35.8mm)
2.07" x 1.41" (52.6 x 35.8mm)
2.07" x 1.41" (52.6 x 35.8mm)
Motor Weight
6.6oz. (187.0g)
6.6oz. (187.0g)
6.6oz. (187.0g)
6.6oz. (187.0g)
6.6oz. (187.0g)
6.6oz. (187.0g)
Magnetic Material Operating Temp.*

392° F 
(200° C)

392° F 
(200° C)
392° F 
(200° C)
392° F 
(200° C)
392° F 
(200° C)
392° F 
(200° C)
Compatible Novak Speed Controls
GTB, SLYDR
GTB, SLYDR
GTB, SLYDR
GTB, SLYDR
GTB, SLYDR
GTB, SLYDR, HAVOC 3S
Recommended Use
On-Road High Traction
Off-Road High Traction / 4WD / On-Road Low Traction
Off-Road High Traction / General On Road
Off-Road Medium Traction / Basher
Off-Road Medium Traction / Basher
Slippery Track Conditions / Basher
*Motors are not capable of running at 200° C (392° F). The recommended operating temperature is 70° C (160° F).
 
REPLACEMENT / OPTIONAL PARTS
#5351-#5353 Brushless Shielded Sensor Harnesses – 9", 6" & 4"  (replacement/optional)
#5416-#5418 Brushless Motor Cooling Kit (optional)
#5508 14G Brushless Motor & Battery Wire Set (replacement)
#5647/#5651 Cooling Fan 25x25x10 (replacement)
#5731 3.5mm Low-Loss Power Connector – 5 pairs (optional)
#5909 Sintered Tuning Rotor-13mm (optional)
#5940 Ballistic Front End Bell and Bearings – 1/8" (replacement)
#5941 Ballistic Sintered Rotor -- 12.3mm (replacement)
#S5420-#S5424 Brushless Motor Sleeves (replacement/optional)
#S5932 Ballistic Motor Hardware Kit (replacement)
#S5942 Ballistic Timing/Sensor Assembly (replacement)
#S5943 Ballistic Back End Bell (replacement)
#S5944 Ballistic Bearing Cap with Rear Bearing (replacement)
#S6603-#S6608 Ballistic Wound Stators (replacement)

B44 4WD Buggy™ is a registered trademark of Associated®.

Customers who bought this product also purchased