H-type chassis with split upper and lower sections and left-right propellers connected on one propeller arm allow the propeller unit angle
to be changed between: 0°, 10°, 20°. Use more stability (0°/ max speed : 30km/h) or more speed (20°/ max speed : 34.5km/h) as a
Includes Arm holder 0°,10°,20°.
Optimal roll and yaw mixing match control from the steering wheel.
Uses similar control movement as a car.
The DRONE RACER is not designed for high altitude performance, but for people to enjoy flying safely within their field of vision near the
ground. A total safety system includes: removable propeller guards; “PROPELLER AUTO STOP SYSTEM” that activates in case you lose
control of the throttle; “ANGLE EMERGENCY AUTO STOP SYSTEM” if the drone becomes inverted, and “RADIO CUT EMERGENCY
AUTO STOP SYSTEM” in case the radio signal is lost. Weighing only 130g, the DRONE RACER is not subject to the Japanese aviation law
so you can fly freely anywhere you like (except in restricted areas). *as at aviation laws 10th December 2015
Model lineup features two body style designs, the G-ZERO and ZEPHYR,
which are based on a futuristic impression of car with the narrow form and
rear wings associated with formula racing cars.
Full color LED installed on front propeller units allows a selection from 6 colors. You can choose your favorite luminescent color to
use as an identifier when racing.
Features rear LED with color indicator of propeller status.
Red : flashing indicates low battery warning, when lit indicates safety function is released & can operate as tail lamp
Yellow : transmitter not connected = RADIO EMERGENCY STOP
Green: flashing indicates detecting horizontal, when lit indicates ready to takeoff and safety function is activated
Blue : gyro calibration in progress
For easy front-rear identification the front mask features 2 bright white LEDs and the tail features red LED.
Additional features include: pairing button; LED color change; calibration correction;setting mode changing button;5V external power port;
extended LED port, and micro USB terminal.
DRONE RACER can connect to your (Windows) computer with the included USB cable to adjust flight settings. In addition, an optional
cable can also be used to connect to an Android terminal with a USB host function to adjust settings.
Download the free (DRONE RACER SETTING MANAGER) to adjust to your favorite setting and turn up the volume of fun.
- 2.4GHz Transmitter KT-231P+
- USB auto cut charger
- Pinion gear replacement tool (combination binding stick)
- 3.7V-1000mAh Li-Po battery
- Arm holder (10°, 20°)
- USB cable
- Spare propeller (for one drone)
- Quick start guide
- Instruction manual
Required for Operation (Sold Separately)
- 4 x AA size batteries for transmitter
- Computer with USB port (for charging) or USB power charger (if output is more than 2A, full charge can be complete within
|Length||302mm (with guard)|
|Width||300mm (with guard)|
|Gear Ratio||5 : 1|
|Propeller||D5 x P4|
|Flight Time||10 min approx.|
|Charging Time||1-2 hours (depending on USB power output)|
|30km/h approx. (normal specification)/34.5km/h approx. (with 20° propeller angle setting)/38km/h approx. (when using optional parts)|
|Energy density||318Wh/L (not subjected PSE)|
|Flight altitude||Low 35cm/High 60cm approx. (setting can be changed using software application)|