Simply Press Micro Wheel Retainers on axle (.047) to securely hold wheel in place. (8/pkg.) Weight: 0.25 grams/ea  ...

This system was designed for medium to large aircraft using 2-56 control rods and standard clevises. Bolt is 6-32 X 1 1/2" (38.1 mm) long. Adjustable horn is 3/4" (19.05 mm) long. QTY/PKG: 2  Weight: 5.5 grams  / assembly  ...

Designed with BIG planes in mind! This product has plenty on clearance from the hinge line with 1 5/32" (29.37 mm) long control horn, the precision fit. Steel cotter pins securely hold aluminum pin in place. For aircraft .91 & above. QTY/PKG: 2 ...

Now your tail dragger can have a tail wheel bracket. The two piece bracket simply glues together to secure pre-bent 1/32" (.79 mm) (.032) wire tail wheel strut. Ideal for use with DU-BRO Micro Tail Wheels. Weight: 0.6 grams/assembly    ...

Don't scratch your tail, our Micro Tail Skid comes with two pins molded on flat for easy installation and secure gluing. Keeps the tail section of your aircraft from getting scuffed up! Weight: 0.57 grams/ea  ...

Mounts inside wing for use with ailerons and control linkage systems. Bellcrank is made from injection molded nylon and comes complete with mounting hardware. 1 set/pkg. Dimension: 0.625" (15.875 mm) from center hole to center of outer hole. &...

Our Micro Aileron System is designed for indoor and park flyer aircraft. Complete with Micro E/Z Link (2), Micro E/Z Connector (2), 1/32" (0.79 mm) (.032) push rods (2) with L-Bend wire (2) and plastic bearing (2). The ideal set for putting ailerons ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Our new Micro Control Horn measures a 1/2" (12.7 mm) in height and comes with a pin molded on the bottom flat for easy installation and secure gluing. Pin can be trimmed off if not desired. Ideal for indoor and small electric park flyers. 2/pkg. Wei...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...

This Micro Pull-Pull system is ideal for small electric aircraft and gives you precision control! Comes complete with (4) Du-Bro Mini E/Z Connectors, 8 aluminum crimps, 10 feet of 10 pound test no stretch control line, and (4) micro adjustment pins. ...

Ideal for smaller electric aircraft! Get the same Du-Bro quality as the larger E/Z Connector, but in a smaller size.   Lightweight aluminum design (0.25 g) allows for up to .047 wire. 2-56 machine screw securely locks wire into place. Pres...

Ideal for smaller electric aircraft! Get the same Du-Bro quality as the larger E/Z Connector, but in a smaller size.   Lightweight aluminum design (0.25 g) allows for up to .047 wire. 2-56 machine screw securely locks wire into place. Pres...

Kwik-Start securely mounts on glow plug for starting glo fuel engines. The Kwik Start Glo Ignitors come complete with Kwik-Mount Storage Klip and charger (#666 & 668 only). Works with NORVEL Freedom XL and 7L glow plugs and all standard glow plug...

Kwik-Start securely mounts on glow plug for starting glo fuel engines. The Kwik Start Glo Ignitors come complete with Kwik-Mount Storage Klip and charger (#666 & 668 only). Works with NORVEL Freedom XL and 7L glow plugs and all standard glow plug...

Fill It The Clean, Fast and Inexpensive Way! Now, one fueling system that can be used with 4 different tubing sizes: 1/16", 3/32", 1/8" and 5/32" I.D. Ideal for cowled engines, lightweight, no leaks, and can be used with glo-fuel and gasoline. The F...

The Glo Caddy conveniently stores your Glo-Plug Ignitor on your Field Box (using supplied mounting bracket) or the Glo Caddy can be removed and worn on a Belt or Pocket. The Glo-Caddy accomodates Sub C and most C size glo-plug ignitors. Keep your Glo...

Du-Bro Standard and Large Clunks are now available separately. Our Clunks weigh 7.5 grams / 0.26 oz. (Standard), 13.6 grams / 0.48 oz. (Large) and are Nickel Plated to prevent corrosion. Fuel Line Barbs are machined right in Clunk to grip your fuel l...

Du-Bro Standard and Large Clunks are now available separately. Our Clunks weigh 7.5 grams / 0.26 oz. (Standard), 13.6 grams / 0.48 oz. (Large) and are Nickel Plated to prevent corrosion. Fuel Line Barbs are machined right in Clunk to grip your fuel l...