Quick Notes:– replaces stock Traxxas #7135 Description At just over 2” wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren’t large enough to provide any protection to the front or rear end of these cool little trucks. R...

Quick Notes:– replaces stock Associated #89025– lighter than stock Description RPM front A-arms for the SC8 & RC8B are built with the same principles and design characteristics built into all RPM A-arms. Some of those design conside...

Quick Notes:– replaces stock Associated #91025 Description RPM engineers meticulously scrutinized a set of front A-arms for the Associated SC10 4×4 to see where we could improve on the stock design. The result… An A-arm design th...

Quick Notes:– an RPM Slash 2wd or Slash 4×4 Rear Bumper is required for installation (will not work with stock or other aftermarket rear bumpers)– tires must be 2.2”/3.0”, short course specific (not included) with an ove...

Quick Notes:– replaces stock Associated #91031 Description Following the release of our front A-arms for the Associated SC10 4×4 (RPM #73962), we now have a set of rear A-arms to complement those fronts for complete SC10 4×4 prote...

Quick Notes:– replaces stock Traxxas #6815R– fits either front or rear location on the Slash 4×4– fits the rear location on the Stampede 4×4 Description RPM Adjustable Height Body Mounts for the Traxxas Slash 4×4...

Quick Notes:– replace stock Associated #89027– lighter than stock Description Whether you’re out having fun bashing or in the middle of the A-main at a national event, nothing is more frustrating than breaking an A-arm. That&rsquo...

Quick Notes:– stock replacement for Traxxas #5833, #5833A & #5833G nerf bars– sold in pairs– made in the USA Description The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different than the original hi...

Quick Notes:– stock replacement for Traxxas #5833, #5833A & #5833G nerf bars– sold in pairs– made in the USA Description The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different than the original hi...

Quick Notes:– replaces stock Axial #AX31018– removes as much as 0.004″ (0.01mm) of slop from the inner and outer hinge pins– more a-arm clearance at the bellcrank for less possibility of center-link damage from full suspension...

Quick Notes:– unique scale design– higher bumper mount for less wear– replaces stock ECX #231019 Description The RPM Torment 4×4 Rear Bumper is a very unique design that dramatically improves strength, durability and scale l...

Quick Notes:– replaces stock Axial #AX80004– stronger and more durable Description RPM Steering Knuckles for the Axial SCX10 are designed for the hardcore trailblazer that needs strength and durability to get them through the rugged bac...

Quick Notes:– lighter than stock A-arms– reduced slop for better performance Description RPM engineers reviewed common breakage areas of stock DESC410R A-arms and redesigned our version to eliminate those issues. Hinge pin areas have be...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac) Desc...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac) Desc...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac) Desc...

Quick Notes:– replaces stock Traxxas #2530 & #2530A– fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac) Desc...

Quick Notes:– requires the use of the included bulkhead– replaces stock Associated #9563 & #9578 Description RPM A-arms for the Associated B4, B4.1 & B4.2 were designed to solve several customer-related complaints about the stoc...

Quick Notes:– replaces stock Losi #LOSB1886 Description Even though the proportions are less on these smaller scale rockets, the engineering behind miniaturized parts needs to be significantly improved to retain a measure of durability and st...

Quick Notes:– replaces stock Helion rear axle carriers #HLNA0313– 5x11x4mm bearings (2) are not included and are required for completion Description RPM Oversized Rear Axle Carriers for the Helion Intrusion XLR, Volition & Criterion...

Quick Notes:– nearly 20% lighter than stock– replaces stock Traxxas #2555– not compatible with electric versions of the Slash 2wd Description Stock Traxxas rear A-arms for the Nitro Slash 2wd are designed to fit a multitude o...

Quick Notes:– for use with RPM #73612, #73614 & #73615 Gearbox Housings only. Description These are replacement 0° & 3° rear mounts for RPM #73612, #73614 & #73615 Gearbox Housings for Traxxas 1:10 scale 2wd vehicles. Each...

Quick Notes:– replaces stock Associated #9718 Description Quite simply, the stock Associated B44, B44.1, B44.2 & B44.3 does not have any front-end protection. Any frontal impact is struck directly with the front shock tower, front A-arms ...

Quick Notes:– works with the Traxxas MXL-6S ESC (#3377).– works with Castle Mamba Monster  2 & Mamba Monster X (#010-0108-00, # 010-0108-01, # 010-0108-02, # 010-0145-00, # 010-0145-01 & # 010-0145-02) ESCs.– ...

Quick Notes:– fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd– replaces stock Traxxas #3691 & #3691A– hybrid nylon / aluminum for a lightweight, yet strong gearbox– intuitive mounting syste...

Quick Notes:– fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd– replaces stock Traxxas #3691 & #3691A– hybrid nylon / aluminum for a lightweight, yet strong gearbox– intuitive mounting syste...

Quick Notes:– fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd– replaces stock Traxxas #3691 & #3691A– hybrid nylon / aluminum for a lightweight, yet strong gearbox– intuitive mounting syste...

Description At a full 6” in width, our bumper can handle some serious abuse! It extends far enough in front of the vehicle to absorb some of the most brutal impacts without transferring the major shock of the impact into the more fragile areas...

Quick Notes:– fits the Slash 4×4, Slash 4×4 LCG Kits, Stampede 4×4,  & the Rally 4wd– replaces stock Traxxas #6832, #6832X, #6837 & #6837X– not interchangeable with stock or aftermarket steering blocks...

Quick Notes:– fits the Associated SC10B, SC10.2 & T4.2FT– not compatible with the T4.2RS – see RPM #70112– replaces stock Associated #91202 Description The RPM Front Shock Tower for the SC10B, SC10.2 & T4.2FT is...