Quick Notes:– fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd– replaces stock Traxxas #3691 & #3691A– hybrid nylon / aluminum for a lightweight, yet strong gearbox– intuitive mounting syste...

Description At a full 6” in width, our bumper can handle some serious abuse! It extends far enough in front of the vehicle to absorb some of the most brutal impacts without transferring the major shock of the impact into the more fragile areas...

Quick Notes:– fits the Slash 4×4, Slash 4×4 LCG Kits, Stampede 4×4,  & the Rally 4wd– replaces stock Traxxas #6832, #6832X, #6837 & #6837X– not interchangeable with stock or aftermarket steering blocks...

Quick Notes:– fits the Associated SC10B, SC10.2 & T4.2FT– not compatible with the T4.2RS – see RPM #70112– replaces stock Associated #91202 Description The RPM Front Shock Tower for the SC10B, SC10.2 & T4.2FT is...

Quick Notes:– fits 2wd versions only– replaces stock rear axle carriers for both ECX #1090 and ECX #234000– 5x11x4mm bearings not included Description RPM Oversized Rear Axle Carriers for the ECX Boost, Circuit 2wd, Ruckus 2wd &am...

Quick Notes:– replaces stock Traxxas #7430– two-piece design for ease of front-end maintenance– incorporated side dirt shields Description Designed from the ground up, the RPM Low Center of Gravity front bulkhead for the Traxxas S...

Quick Notes:– replaces stock Traxxas #7430– two-piece design for ease of front-end maintenance– incorporated side dirt shields Description Designed from the ground up, the RPM Low Center of Gravity front bulkhead for the Traxxas S...

Quick Notes:– replaces stock Losi #LOSB1886 Description Even though the proportions are less on these smaller scale rockets, the engineering behind miniaturized parts needs to be significantly improved to retain a measure of durability and st...

Quick Notes:– replaces stock Losi #LOSB1035 Description RPM helps keep your Mini-T intact by adding some much needed protection out front with our Wide Front Bumper. The RPM Wide Front Bumper for the Mini-T adds an extra ½” of fo...

Quick Notes:– fits the the Associated ProSC4x4, ProLite 4×4 & ProRally 4wd– replaces stock Associated #7157– fits the Thunder Tiger Sparrowhawk and Tomahawk– replaces Thunder Tiger stock #PD7977 Description RPM fro...

Quick Notes:– fits the the Associated ProSC4x4, ProLite 4×4 & ProRally 4wd– replaces stock Associated #7157– fits the Thunder Tiger Sparrowhawk and Tomahawk– replaces Thunder Tiger stock #PD7977 Description RPM fro...

Quick Notes:– fits the Associated SC10B, SC10.2 & T4.2FT– not compatible with the T4.2RS or SC10.2RS – see “Tech Notes” below– replaces stock Associated #91201 Description The SC10B, SC10.2 & T4.2FT have ...

Quick Notes:– fits the Associated SC10B, SC10.2 & T4.2FT– not compatible with the T4.2RS or SC10.2RS – see “Tech Notes” below– replaces stock Associated #91201 Description The SC10B, SC10.2 & T4.2FT have ...

Quick Notes:– fits 2wd versions of the Boost, Ruckus, Circuit & Torment only– replaces the bellcranks and center-link from stock #ECX1028 Description Are you tired of the wandering tendencies of your ECX Boost, 2wd Circuit...

Description Are you looking for a more durable, stronger alternative to your stock Helion Animus A-arms? Are you looking to eliminate some of the slop in the suspension system of your truck? If you said yes to either of these questions, then you nee...

Description Are you looking for a more durable, stronger alternative to your stock Helion Animus A-arms? Are you looking to eliminate some of the slop in the suspension system of your truck? If you said yes to either of these questions, then you nee...

Quick Notes:– replaces stock Axial #AX80041– stable base for less Rock Slider flex– full length with included kick-out for body and rear wheel protection Description RPM Rock Sliders start with all-new frame-rail mounts that use b...

Quick Notes:– replaces the caster blocks for stock ECX #234000– fits 2wd versions only Description Don’t let failed caster blocks ruin your day of fun. RPM Heavy Duty Caster Blocks for the ECX Boost, 2wd Circuit, 2wd Ruckus &...

Quick Notes:– replaces stock Associated #9715 Description Our first objective with our version of these a-arms was to improve strength and durability without sacrificing rigidity to keep these race-bred machines at the front of the pack. Our ...

Quick Notes:– for use with 3.5mm (.137”) diameter turnbuckles and 4.3mm (.169”) diameter ball studs Description RPM has been known for exceptionally strong, tight-tolerance rod ends (also known as “ball cups”). We shou...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs– replaces Losi #A-6005 Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in a...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs– replaces Losi #A-6005 Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in a...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs– replaces Losi #A-6005 Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in a...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs– replaces Losi #A-6005 Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in a...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– specially designed for Lunsford & Associated Super Duty Ball Studs & Turnbuckles only Description RPM rod ends are made specifically to accommodate Lunsford’s Super Duty Turnbuckles & Ball Studs and Associated&...