Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Description When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they are mold...

Quick Notes:– specially designed for Lunsford & Associated Super Duty Ball Studs & Turnbuckles only Description RPM rod ends are made specifically to accommodate Lunsford’s Super Duty Turnbuckles & Ball Studs and Associated&...

Quick Notes:– replaces stock Losi #LOSB2417– tested and guaranteed to fit with stock and RPM components only Description The Losi Ten-SCTE is a wickedly fast short course truck. That type of performance places extra stress on the protec...

Quick Notes:– fits 2wd versions only– replaces spindle blocks from stock ECX #1089 and from ECX #234000– 5x11x4mm bearings not included Description RPM Oversized Front Spindle Blocks for the ECX Boost, Circuit 2wd, Ruckus 2wd &...

Quick Notes:– replaces stock Traxxas #2750R– reduced hinge pin slop– larger bosses around hinge pins for additional strength Description RPM Rear A-arms for the Traxxas Bandit are finally here to strengthen the rear end of these a...

Quick Notes:– works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00– fits the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4&time...

Quick Notes:– works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00– fits the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4&time...

Quick Notes:– fits the Losi Ten-SCTE, Ten-T & 810– replaces stock Losi #LOSB2021– outer hinge pin diameters are larger by as much as 60% Description RPM A-arms for the Losi Ten-SCTE, Ten-T & 810 are designed with strength ...

Description The RPM Head Guard for the Losi LST Mach .26 & LST2 Mach 427 engine head is nearly 5/16” thick adding serious skid and impact resistance to the fragile cooling fins of the stock Losi LST Mach .26 & LST2 Mach 427 engine head...

Description The RPM Head Guard for the Losi LST Mach .26 & LST2 Mach 427 engine head is nearly 5/16” thick adding serious skid and impact resistance to the fragile cooling fins of the stock Losi LST Mach .26 & LST2 Mach 427 engine head...

Description Camber is one of the most critical adjustments on a monster truck. The stock camber angles on the LST is set at zero degrees and the A-arms do NOT allow adjustability. RPM upper A-arms for the LST incorporate a tough 303 series stainless...

Description Camber is one of the most critical adjustments on a monster truck. The stock camber angles on the LST is set at zero degrees and the A-arms do NOT allow adjustability. RPM upper A-arms for the LST incorporate a tough 303 series stainless...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– does not fit HPI “Big Bore” shocks Description What better way is there to add some style to your shocks than with a touch of RPM color? Not only do these spring cups look great, they fit perfectly and are very easy ...

Quick Notes:– fits the Losi Ten-SCTE, Ten-T & 810– replaces stock Losi #LOSB2023– outer hinge pin diameters are larger by as much as 60%! Description RPM A-arms for the Losi Ten-SCTE, Ten-T & 810 are designed with strength...

Quick Notes:– replaces stock Losi #LOSB2417– moved rearward by a full ½” (13mm) to protect the body– mud flaps have been removed for weight reduction Description RPM is proud to offer our Rear Bumper for the Losi Ten-...

Quick Notes:– fits the Losi Ten SCTE, Ten-T and 810– protects expensive aluminum chassis from damage Description Protection is the key to survivability. Sadly, the aluminum chassis plate of the Losi Ten SCTE, Ten-T and 810 is completely...

Quick Notes:– lowered to reduce chassis damage– replaces stock #ECX231017 Description The RPM Rear Skid Plate for the ECX Circuit 4×4 and Torment 4×4 (see “Tech Notes” below) adds protection to the chassis where ...

Quick Notes:– replaces stock Losi #LOSB1503 Description The first element of protection for an R/C vehicle is an effective front bumper. The Losi Micro-T does not have a real front bumper. RPM steps in with our new wide front bumper. Check ou...

Quick Notes:– replaces stock Losi #LOSB2421– protects the aluminum chassis from abrasion damage– eliminates the stock bumper support ring from the truck Description The RPM Front Bumper and Skid Plate for the Losi Ten SCTE adds a ...

Quick Notes:– for use with RPM Losi Ten-SCTE & ECX Torment 4×4 Rear Bumpers only– number plate decals not included Description Our Mud Flaps and Number Plate Kit is an accessory item to add that level of detail unmatched by st...

Quick Notes:– fits the Mini 8ight, Mini 8ight 2.0 & Mini 8ight-T– replaces stock Losi #LOSB1035– measures in at 3.5” wide (89mm)– extends out in front by almost 1 full inch (25mm) Description We’ve said it be...

Quick Notes:– replacement Spline Drive Adapters for use with RPM Wheels only– contains 3 pairs of adapters in 3 thicknesses Description This replacement set of 6 Spline Drive Adapters are for use with RPM Spline Drive Wheels only. Each ...