Comes with washer permanently attached to screw so you can't lose it. Screw size: #2 X 7/16".  (24/pkg) Weight: 0.46 grams/each  ...

Includes 1.5' (457.2 mm) blue (medium 3/32" / 2.38 mm) and 1.5' (457.2 mm) red (medium 3/32" / 2.38 mm) silicone tubing to distinguish your carb line and vent line.  Glo fuel only, do not use with gasoline.  ...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available 3/4" (19 mm) thread on one end (.072" rods w/2-56 thread) (.093" rods w/4-40 thread). Fully...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available 3/4" (19 mm) thread on one end (.072" rods w/2-56 thread) (.093" rods w/4-40 thread). Fully...

3 piece set, 4-40 threaded ball and self-threading socket for 4-40 pushrods, 4-40 lock nut. 1/pkg. Weight: 2 grams/assembly  ...

#881: For medium to large scale aircraft - .40-.92.  Comes complete with high quality aluminum horns, washers, steel 6-32 long shaft, nuts, horn arms, and kwik-links for 2-56 rods and 15ft. of nylon coated stranded steel cable - .020 dia. a...

#881: For medium to large scale aircraft - .40-.92.  Comes complete with high quality aluminum horns, washers, steel 6-32 long shaft, nuts, horn arms, and kwik-links for 2-56 rods and 15ft. of nylon coated stranded steel cable - .020 dia. a...

#880: For medium to large scale aircraft - .40-.91. Comes complete with high quality aluminum horns, washers, steel 6-32 long shaft, nuts, horn arms, and kwik-links for 2-56 rods. 2/pkg. #882: For large scale aircraft - .91 and larger. Com...

#880: For medium to large scale aircraft - .40-.91. Comes complete with high quality aluminum horns, washers, steel 6-32 long shaft, nuts, horn arms, and kwik-links for 2-56 rods. 2/pkg. #882: For large scale aircraft - .91 and larger. Com...

For medium to large aircraft .40 to .91 size (#878) / .91 and above (#879), includes horn arms, and clevises for 2-56 rods (#878) / 4-40 rods (#879) with aluminum pivot pins. Arm Accommodates 6-32 screw/rod (#878) 8-32 screw/rod (#879) and clevis fit...

For medium to large aircraft .40 to .91 size (#878) / .91 and above (#879), includes horn arms, and clevises for 2-56 rods (#878) / 4-40 rods (#879) with aluminum pivot pins. Arm Accommodates 6-32 screw/rod (#878) 8-32 screw/rod (#879) and clevis fit...

Simply Press Micro Wheel Retainers on axle (.047) to securely hold wheel in place. (8/pkg.) Weight: 0.25 grams/ea  ...

This system was designed for medium to large aircraft using 2-56 control rods and standard clevises. Bolt is 6-32 X 1 1/2" (38.1 mm) long. Adjustable horn is 3/4" (19.05 mm) long. QTY/PKG: 2  Weight: 5.5 grams  / assembly  ...

Designed with BIG planes in mind! This product has plenty on clearance from the hinge line with 1 5/32" (29.37 mm) long control horn, the precision fit. Steel cotter pins securely hold aluminum pin in place. For aircraft .91 & above. QTY/PKG: 2 ...

Now your tail dragger can have a tail wheel bracket. The two piece bracket simply glues together to secure pre-bent 1/32" (.79 mm) (.032) wire tail wheel strut. Ideal for use with DU-BRO Micro Tail Wheels. Weight: 0.6 grams/assembly    ...

Don't scratch your tail, our Micro Tail Skid comes with two pins molded on flat for easy installation and secure gluing. Keeps the tail section of your aircraft from getting scuffed up! Weight: 0.57 grams/ea  ...

Mounts inside wing for use with ailerons and control linkage systems. Bellcrank is made from injection molded nylon and comes complete with mounting hardware. 1 set/pkg. Dimension: 0.625" (15.875 mm) from center hole to center of outer hole. &...

Our Micro Aileron System is designed for indoor and park flyer aircraft. Complete with Micro E/Z Link (2), Micro E/Z Connector (2), 1/32" (0.79 mm) (.032) push rods (2) with L-Bend wire (2) and plastic bearing (2). The ideal set for putting ailerons ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design.  4/pkg. Weights: #849 - 0.01 gram/ea #920 - 0.04 gram/ea #940 - 0.06 gram/ea ...

Our new Micro Control Horn measures a 1/2" (12.7 mm) in height and comes with a pin molded on the bottom flat for easy installation and secure gluing. Pin can be trimmed off if not desired. Ideal for indoor and small electric park flyers. 2/pkg. Wei...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...

Comes complete with (2) pushrods, (2) pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for small to medium electric aircraft. 2 sets/pkg. Weight: #847 - 3.2 grams / set #852- 4.6&nb...