Description Camber is one of the most critical adjustments on a monster truck. The stock camber angles on the LST is set at zero degrees and the A-arms do NOT allow adjustability. RPM upper A-arms for the LST incorporate a tough 303 series stainless...

Description Camber is one of the most critical adjustments on a monster truck. The stock camber angles on the LST is set at zero degrees and the A-arms do NOT allow adjustability. RPM upper A-arms for the LST incorporate a tough 303 series stainless...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– fits all versions of the 1:16 scale Slash and Revo– replaces stock Traxxas #7034– sold in pairs (two sets will be needed to complete one full vehicle)– requires a 0.05″ or 1.25mm hex wrench (not included) f...

Quick Notes:– does not fit HPI “Big Bore” shocks Description What better way is there to add some style to your shocks than with a touch of RPM color? Not only do these spring cups look great, they fit perfectly and are very easy ...

Quick Notes:– fits the Losi Ten-SCTE, Ten-T & 810– replaces stock Losi #LOSB2023– outer hinge pin diameters are larger by as much as 60%! Description RPM A-arms for the Losi Ten-SCTE, Ten-T & 810 are designed with strength...

Quick Notes:– replaces stock Losi #LOSB2417– moved rearward by a full ½” (13mm) to protect the body– mud flaps have been removed for weight reduction Description RPM is proud to offer our Rear Bumper for the Losi Ten-...

Quick Notes:– fits the Losi Ten SCTE, Ten-T and 810– protects expensive aluminum chassis from damage Description Protection is the key to survivability. Sadly, the aluminum chassis plate of the Losi Ten SCTE, Ten-T and 810 is completely...

Quick Notes:– lowered to reduce chassis damage– replaces stock #ECX231017 Description The RPM Rear Skid Plate for the ECX Circuit 4×4 and Torment 4×4 (see “Tech Notes” below) adds protection to the chassis where ...

Quick Notes:– replaces stock Losi #LOSB1503 Description The first element of protection for an R/C vehicle is an effective front bumper. The Losi Micro-T does not have a real front bumper. RPM steps in with our new wide front bumper. Check ou...

Quick Notes:– replaces stock Losi #LOSB2421– protects the aluminum chassis from abrasion damage– eliminates the stock bumper support ring from the truck Description The RPM Front Bumper and Skid Plate for the Losi Ten SCTE adds a ...

Quick Notes:– for use with RPM Losi Ten-SCTE & ECX Torment 4×4 Rear Bumpers only– number plate decals not included Description Our Mud Flaps and Number Plate Kit is an accessory item to add that level of detail unmatched by st...

Quick Notes:– fits the Mini 8ight, Mini 8ight 2.0 & Mini 8ight-T– replaces stock Losi #LOSB1035– measures in at 3.5” wide (89mm)– extends out in front by almost 1 full inch (25mm) Description We’ve said it be...

Quick Notes:– replacement Spline Drive Adapters for use with RPM Wheels only– contains 3 pairs of adapters in 3 thicknesses Description This replacement set of 6 Spline Drive Adapters are for use with RPM Spline Drive Wheels only. Each ...

Quick Notes:– extreme strength and durability– weighs in at a mere 4 grams per guard (including hardware)– sold in pairs (two pairs required per Alias)– 0.05″ hex key wrench is required (not included) for installation D...

Quick Notes:– extreme strength and durability– weighs in at a mere 4 grams per guard (including hardware)– sold in pairs (two pairs required per Alias)– 0.05″ hex key wrench is required (not included) for installation D...

Quick Notes:– only weighs 4.5 grams for all four landing gear!– adds 0.8″ (20mm) of extra height.– replaces LaTrax #6649 rubber feet.– a 0.05″ hex key wrench is required (not included) for installation. Descriptio...

Quick Notes:– only weighs 4.5 grams for all four landing gear!– adds 0.8″ (20mm) of extra height.– replaces LaTrax #6649 rubber feet.– a 0.05″ hex key wrench is required (not included) for installation. Descriptio...

Quick Notes:– works with tires up to 4.5 inches (114mm) and taller*– accurate to within ½° Description One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after ...

Quick Notes– works with most 1:8, 1:10 or 1:16 scale shocks– for use with all shocks up to 6-1/4” (158mm) long using 4-40 or 3mm mounting screws Description How do you know if your shocks are built correctly? Do you “eyeball...

Quick Notes:– works with tires up to 6.5 inches (165mm) and taller*– accurate to within ½° Description RPM has combined the most popular genre of R/C – Monster Trucks – with one of the most popular RPM products ev...

Quick Notes:– built in chassis brace for extra chassis protection– fits all versions of the Associated SC10 (SC10, SC10.2, etc.)– replaces stock Associated #9816– does not fit the SC10GT or GT2) Description RPM is proud to o...

Quick Notes:– built in chassis brace for extra chassis protection– fits all versions of the Associated SC10 (SC10, SC10.2, etc.)– replaces stock Associated #9816– does not fit the SC10GT or GT2) Description RPM is proud to o...

Quick Notes:– replaces stock Helion #HLNA0082– sold in pairs Description Let’s face it; breaking parts sucks! That’s why you need RPM on your ride. RPM A-arms for the Helion Dominus SC, SCv2 & TR are the strongest A-arms...

Description Designed to eliminate scratching the shock body, this two-piece wrench set simplifies many aspects of shock assembly and disassembly. One wrench slides around the shock body hex while the other fits snugly over the shock cap. Accept no i...

Quick Notes:– replaces stock Associated #7446, #7917 & #9563– fits the GT2, SC10, T4, T4.1 & T4.2RS (see “Tech Notes” for SC10 & T4 installation)– not compatible with the T4.2FT, SC10B or SC10.2 – see R...

Quick Notes:– replaces stock Associated #7446, #7917 & #9563– fits the GT2, SC10, T4, T4.1 & T4.2RS (see “Tech Notes” for SC10 & T4 installation)– not compatible with the T4.2FT, SC10B or SC10.2 – see R...

Quick Notes:– fits the GT2 & SC10GT exclusively– replaces stock Associated #7390 Description The long-running success of RPM A-arms for the original GT has led to the release of our A-arms for the GT2 / SC10GT. RPM GT2 A-arms were d...